HPE XP7 Automation Director User Manual page 142

Navigation pane
Resource Criteria
Host Settings
Submit Service Request settings
The following table lists the Submit Service Request settings for the Allocate Volumes with Configuration
Manager service template.
Navigation pane
Volume Settings
142 Services catalog
Settings Pane
Volume Capacity
Pool
Volume Label
LUN Starts from
Virtual LDEV ID Starts From
Storage Port Configuration
Port Type
Host Group Settings
Settings Pane
Configuration Manager
Connection
Storage System
Resource Group
Number of Volumes
LDEV ID Starts From
Description
Specify the volume capacity in
MBs, GBs, or TBs.
Provides a table from which you
can choose the pool.
Specify the volume label.
Specify the starting logical unit
number assigned to the volume
for a host.
Specify the starting Virtual LDEV
ID as a hexadecimal number for
the volume to allocate.
Specify the Storage Port
Configuration Expressions (Name
and Value) that meets the
specified criteria (Equals, Not
Equals, Starts with, and Ends
with) based on the selected
condition (All or Any).
Specify either fibre or iSCSI as
the port type.
Specify the parameters required
to create a new Host Group/
iSCSI Target or specify to use an
existing Host Group/iSCSI Target.
Description
Provides a table from which you
can choose the Configuration
Manager connection.
Provides a table from which you
can choose the storage system.
Specify the Resource Group.
Specify the number of volumes to
make available for the service. If
necessary, you can specify a
Single Value, Multiple Values,
or a Range.
Specify the starting LDEV ID as a
hexadecimal number for the
volume to allocate.
Table Continued