Stop Virtual Servers: Settings - HPE XP7 Automation Director User Manual

Property key
aws.targetHost
aws.accessKeyId
aws.secretAccessKey
aws.region
aws.checkInstanceEnabl
edCount
aws.checkInstanceEnabl
edInterval
Service Definition and Submit Service Properties
The following table lists the properties shown in the Service Definition window and the Submit Service
window.
Property key
aws.foreachInstanceId

Stop virtual servers: Settings

The processing overview is as follows:
1. Obtain the instance status.
2. Stop the instance if the instance is running. If the instance is already stopped, skip processing for
stopping the instance.
Perform the above processing in parallel with the instances specified to the instance IDs
(aws.foreachInstanceId property).
Property name
Host name of the AWS
control server
Access key ID
Secret access key
Region
Instance status (started)
check count
Instance status (started)
check interval
Property name
Instance ID (multiple
selection allowed)
Description
Specify the host name or
IP address of the AWS
control server. IPv6
address is not
supported.
Specify the access key
ID for connecting to
AWS.
Specify the secret
access key for
connecting to AWS.
Specify an AWS region
that is a connection
destination.
Specify the number of
times to check for
instance start. The
maximum waiting time is
determined by
combining this count and
the instance status
(started) check interval.
Specify the interval (in
seconds) to check for
instance start.
Description
Specify an instance ID
or instance IDs. To
specify multiple IDs,
separate them by using
a comma. Up to 99 IDs
can be specified.
Stop virtual servers: Settings
Required or optional
R
R
R
R
R
R
Required or optional
R
321