Allocate Fabric Aware Volumes With Configuration Manager: Service Details - HPE XP7 Automation Director User Manual

Allocate Fabric Aware Volumes with Configuration Manager: Service details

The following service template details apply to the Allocate Fabric Aware Volumes with Configuration
Manager service template.
Software prerequisites
The following software is required to use the Allocate Fabric Aware Volumes with XP7 Configuration
Manager service template:
• XP7 Configuration Manager v8.5.3-00 or later
• Network management software
◦ Brocade Network Advisor (BNA) 12.4, 14.0 (SAN System Administrator or Zone Administrator role
is required)
or
◦ Data Center Network Manager (DCNM) 7.1 (network-admin role is required)
Setup prerequisites
Complete the following setup prerequisites if you have not already done so:
• Register the LDEV ID, DP Pool, Port, and Host Group ID used by the service to the same resource
group or virtual storage machine.
• Create a web service connection for the BNA or DCNM server.
• Create a web service connection for the Configuration Manager REST API that uses the same
credentials for each storage system managed by XP7 Configuration Manager.
• Verify that the common credentials used to access all storage systems are assigned the following
roles:
◦ Security Administrator (View and Modify)
◦ Storage Administrator (Provisioning)
Default ports
Port number
22015
22016
23450
23451
Edit Service settings
The following table lists the Edit Service settings for the Allocate Fabric Aware Volumes with
Configuration Manager service template.
Use
Communication from Automation Director client to Automation Director server.
Secure communication from Automation Director client to Automation Director
server.
Communication from Automation Director to XP7 Configuration Manager.
Secure communication from Automation Director to XP7 Configuration
Manager.
Allocate Fabric Aware Volumes with Configuration Manager: Service details 131