HPE XP7 Automation Director User Manual page 136

Navigation pane
Resource Criteria
Host Settings
Fabric Settings
136 Services catalog
Settings pane
Storage Port Configuration
Port Type
Host Group Settings
Use Fabric Settings
Connection Names
Resource Groups
Description
Specify the Storage Port Configuration
Expressions (Name and Value) that
meets the specified criteria (Equals, Not
Equals, Starts with, and Ends with)
based on the selected condition (All or
Any).
Specify fibre as the port type.
Specify the parameters required to
create a new Host Group or specify to
use an existing Host Group.
Determines whether to use fabric
information from the FC switch manager
services for path selection.
Specifies which FC switch manager
services are used to select a path.
The settings of each FC switch manager
services must be assigned an
Infrastructure Group from the
Administration tab.
Note: Use a comma when specifying
multiple BNAs or DCNMs.
If omitted, all FC switch managements
services assigned Infrastructure Group
are selected. If "Use Fabric Settings" is
false, this field is ignored.
BNA and DCNM cannot be used
together.
Specifies the Resource Group of the
BNA. If "Use Fabric Settings" is false,
this field is ignored. For DCNM, this field
is ignored.
Table Continued