HPE XP7 Automation Director User Manual page 326

Hide thumbs Also See for XP7 Automation Director:
Table of Contents

Advertisement

– IP address
– Subnet mask
– Default gateway
– Preferred DNS server
– Alternate DNS server
The OS settings must have been initialized by using Sysprep.
Also, the following conditions must be satisfied:
– Enter System Out of Box Experience (OOBE) is selected from the System Cleanup Action
list.
– Generalize check box is selected.
Agentless connection must be possible.
A maximum of four NICs must be set up.
Connections with virtual switches must be closed.
The firewall must permit ICMP (ECHO) replies.
If the container server and the Hyper-V server are different, the folder containing the virtual server
exported from the Hyper-V server must be a shared folder.
No legacy network adapter can be set.
Snapshots and differential disks are not created.
Conditions related to the settings on the virtual server:
The virtual server name must be unique within the Hyper-V server.
Conditions related to this product settings:
For the following addresses, authentication information must have been set in the agentless
connection definition on the [Management] tab: the local server address (a loopback address that
can be resolved from the name "localhost"), Hyper-V server address, and the management-use IP
address of the virtual server to be deployed.
Server requirements
The following servers are needed:
Hyper-V server
Server on which Hyper-V is installed.
Virtual server
Virtual server managed by Hyper-V
Exported virtual server
326
Additional service templates

Advertisement

Table of Contents
loading

Table of Contents