HPE XP7 Automation Director User Manual page 168

Navigation pane
Resource Criteria
Volume Settings
168 Services catalog
Settings pane
Resource Group
Virtual Model
Virtual Serial Number
Port Selection
Storage Port
Number of Volumes
LDEV ID Starts From
Volume Capacity
Pool
Volume Label
LUN Starts From
Virtual LDEV ID Starts From
Description
Specify the resource group from
which resources are used (for
example LDEV ID and host group
ID). You must specify the
resource group for VSM when
allocating volumes in VSM.
Select the Virtual Model
associated with VSM.
This is needed when allocating
volumes to VSM. This field is
inactive when the Virtual Storage
System ID is 0 in the Resource
Group
Specify the Virtual Serial Number
associated with VSM when
allocating volumes in VSM.
Select the storage port selection
criteria:
• "Smaller number of hosts":
Select the port with the
smallest registered WWN.
(Default value)
• "Smaller number of volumes":
Select the port with the
smallest registered LUN.
Specify a storage port for
provisioning.
Specify the number of volumes to
create.
Specify the starting LDEV ID as a
hexadecimal number for the
volume to allocate.
Specify the volume capacity.
Provides a table from which you
can choose the pool.
Specify the volume label.
Specify the starting logical unit
number assigned to the volume
for a host.
Specify the starting Virtual LDEV
ID as a hexadecimal number for
the volume to allocate.
Table Continued