HPE XP7 Automation Director User Manual page 179

Navigation pane
Resource Criteria
Host Group Settings
Fabric Settings
Settings pane
Resource Group
Port Selection
Storage Port
Script for Host Group Naming
Host Mode
Host Mode Options
BNA Connections
Resource Group
Target Fabrics
Use Existing Zone
Use Active Zone Only
Num. of Hops Restriction
Maximum Num. of Hops
Description
Specify the resource group from
which resources are used (for
example LDEV ID and host group
ID). You must specify the
resource group for VSM when
allocating volumes in VSM.
Select the storage port selection
criteria:
• "Smaller number of hosts":
Select the port with the
smallest registered WWN.
(Default value)
• "Smaller number of volumes":
Select the port with the
smallest registered LUN.
Specify the storage port for
provisioning.
Specify a naming rule for the
Host Group name as a script.
Specify the host mode.
Specify the host mode options.
Select a Brocade Network
Advisor server which is registered
as a Web Service Connection in
the Administration Tab.
Specify the Resource Group of
the BNA if you want to narrow
down target resources.
Specify Fabrics in BNA if
narrowing down target resources
(optional).
Specify whether to narrow down
target resources to those in
existing zones.
Specify whether to use the active
zone only.
Specify whether to narrow down
target resources based on hop
count for the path.
Specify the maximum number of
hops when "Num. of Hops
Restriction" is set to True.
Table Continued
Services catalog 179