HPE XP7 Automation Director User Manual page 240

Property Key
UserResponsePlugin.dia
logText
UserResponsePlugin.res
ponseTimeOut
Service Definition and Submit Service Properties
The following table lists the properties visible in the Service Definition and Submit Service windows for
the Create Snapshot of Virtual Machine service template.
Property Key
vmware.vmName
NOTE: Although some of the properties in the tables indicate that they can be omitted, they may be
required when used in conjunction with some other property setting as indicated in the descriptions.
Prerequisites
The following conditions must be met:
• VMware vSphere ESXi (or VMware ESX Server) is managed by VMware vCenter Server.
• There is no duplicate virtual server name under the same vCenter.
• There is no duplicate snapshot name in the same virtual server.
• VMware Tools is installed on the target virtual server.
• The pre-change power status of the target virtual server is OFF.
Server requirements
To use this service template, the following servers are required:
240 Additional service templates
Property Name
Additional dialog box
text
Response timeout time
(minutes)
Property Name
Virtual server name
Description
Enter additional text to
appear in the response
input dialog box, in text
or HTML format.
Supported HTML tags
are anchor tags, bold
tags, break tags, font
tags, italics tags, and
underline tags.
Specify how long (in
minutes) the service
waits for a user
response before timing
out. In the event of a
response timeout, the
service will terminate
abnormally.
Description
Specify the name of the
virtual server. This name
is used to represent the
virtual server in VMware
vCenter server. It is not
used as a host name by
the OS.
Required or optional
O
R
Required or optional
R