HPE XP7 Automation Director User Manual page 107

Option
/recurrencestart
/reregister
/taskdetaildir
/setoriginalsubmitter
/help
Command location
installation-folder\bin
Return codes
The following table lists the submittask command return codes and descriptions.
Return code Description
0
The command succeeded.
1
The argument is invalid.
Description
Specify a date for a recurring service to start.
Use this option with the /recurrencepattern option, and the /
recurrencetime option.
When this option is specified, the following conditions will result in an
error:
• An invalid combination of arguments.
• The form of the specified date is inaccurate.
• The specified date is outside the range on January 1, 1994 to
December 31, 2036.
Format:
Specify the date in the form of "yyyy-mm-dd." Specify the year as
yyyy in four digits. Specify the month as mm in the range 1 (or 01) to
12. Specify a day as dd in the range 1 (or 01) to 31.
Specify if you want to reregister scheduled tasks.
This option has no value.
Specify a folder that was outputted by the listtasks command
with the /taskdetails option. Use an absolute or relative path.
The folder must be located on a local disk.
The maximum path length is 180 characters.
Specify whether you want to reregister tasks as the user at the point
in time in which task details were output.
This option has no value.
When this option is not specified, the user ID specified as the /user of
the submittask command serves as the assigned user of the task
after reregistration.
Show command syntax and usage.
Table Continued
CLI commands 107