HPE XP7 Automation Director User Manual page 112

Property
SSH authentication method
User ID
Password
Super user's password
Status
Last connection time
Usage example: To output a list of registered agentless connection-destination definitions to a file
listremoteconnections /file bbbbb /user xxxxx /password yyyyy
Example: Output message for successful list
KNAE03000-I The listremoteconnections command will now start.
KNAE03001-I The listremoteconnections command ended normally.
Example: Output message for unsuccessful list
KNAE03000-I The listremoteconnections command will now start.
KNAE03002-E The listremoteconnections command ended abnormally (12345).
Example: Typical output file
"Id","Method","IP Address/Host Name","Service Group","Authentication
","Protocol","SSH Authentication Method","User ID","Password","Super User's
Password"
"1","IPv4","10.197.158.107","All Service
Groups","Enable","Windows","","Administrator@DOM1","********",""
"10","HostName","vmc006","All Service Groups","Enable","SSH","Password
Authentication","ao","********","********"
"100","IPv6","fd00::6172:839:2e15:f6f3:da7e"," All Service Groups
","Enable","Telnet","","","",""
"1000","HostName","vmc007"," All Service Groups ","Disable","","","","",""
112 CLI commands
Header Section (first
line)
SSH authentication
method
User ID
Password
Super user's password
Connection Status
Connected Time
Data Section (second and subsequent
lines)
When the protocol is not SSH, null
character ("")
When the protocol is SSH, any one of
the following:
• Password Authentication
• Public Key Authentication
• Keyboard Interactive Authentication
User ID of the user who logs on to the
connection-destination host.
Fixed to "*******"
Fixed to "*******"
Connection Successful, Error, Unknown,
or -.
The last connection time.