Built-In Shared Properties - HPE XP7 Automation Director User Manual

Automation Director provides a set of built-in shared properties that are based on common provisioning
tasks. Additionally, shared properties can be customized when creating a service template using Service
Builder.
More information
Modifying the shared service properties on page 78
Built-in shared properties on page 77

Built-in shared properties

NOTE: When a task runs, the values in the built-in shared properties are applied to the task. If you
change a value of a built-in shared property, the change will apply to the task the next time it runs.
The following table lists the shared service properties that are provided with Automation Director.
Shared service properties
Upper Limit of the Task Status
Polling Duration
Task Status Polling Interval
Timeout for Receiving Responses
to Volume Allocation and Polling
Requests
Auto-Configuration of Volume
Labels at Volume Allocation
Description
Upper limit (hrs.) of the polling
duration for task in the storage
management software
Polling interval (seconds) for
monitoring task running in the
storage management software.
Timeout (seconds) for receiving
responses to volume allocation and
polling requests in the storage
management software.
Specifies whether to set a volume
allocation. If you specify "true", and
do not provide a volume label, then a
volume label is automatically
assigned.
Values
The default is 240 hours.
The default is 60 seconds.
The default is 60 seconds.
True or False
Table Continued
Built-in shared properties 77