Delete Datastore On Vmware Vsphere: Service Details - HPE XP7 Automation Director User Manual

Delete Datastore on VMware vSphere: Service details

The general steps for using this service template to delete a Datastore on VMware vSphere are as
follows:
1. From the vCenter control server, perform data store deletion processing on an ESX server.
2. From the Device Manager CLI server, delete the LU from the host group.
3. From the Device Manager CLI server, format and delete the specified virtual volume (DP volume).
Service Definition Properties
The following table lists the properties shown in the Service Definition window for the Delete Datastore
on VMware vSphere service template.
Property Key
hdvm.targetHost
hdvm.cliInstallPath
hdvm.hdvmProtocol
hdvm.hdvmHostName
hdvm.hdvmPortNumber
hdvm.hdvmUserName
hdvm.hdvmPassword
vmware.targetHost
Property Name
Host name of Device
Manager CLI server
Installation path of
Device Manager CLI
Protocol for Device
Manager communication
Device Manager server
host name
Port number for Device
Manager connection
User name for Device
Manager connection
Password for Device
Manager connection
Host name of VMware
vCenter control server
Delete Datastore on VMware vSphere: Service details
Description
Specify the host name or
IP address of the server
where Device Manager
CLI is installed. You
cannot specify an IPv6
address.
Specify the installation
path of Device Manager
CLI.
Specify the protocol (http
or https) to use when
connecting to Device
Manager server.
Specify the host name or
IP address of the Device
Manager server.
Specify the port number
used to connect to the
Device Manager server.
Specify the user ID to
use when connecting to
Device Manager server.
Specify the password to
use when connecting to
Device Manager server.
Specify the host name or
IP address of the server
(a server with vSphere
PowerCLI installed) that
will be used to control
VMware vCenter. You
cannot specify an IPv6
address.
Required or optional
R
R
R
R
R
R
R
R
Table Continued
223