Stop Virtual Server: Service Details - HPE XP7 Automation Director User Manual

Property key
hyperv.foreachVmName Virtual server names
hyperv.checkNetworkCo
nnection

Stop virtual server: Service details

The processing overview is as follows:
1. The status of a virtual server is obtained.
2. If the virtual server is running, the OS of that virtual server is shut down. If the virtual server is stopped,
the processing to shut down the OS is skipped. In all other cases, processing for that virtual server
fails.
The above processing is performed in parallel for the specified virtual servers.
Server requirements
The following servers are needed:
• Hyper-V server
Server on which Hyper-V is installed.
• Virtual server
Virtual server managed by Hyper-V
Prerequisites
• The name of each virtual server must be unique within a single Hyper-V server.
• The Shut down OS service of the Hyper-V Integration Service on the target virtual server must be
enabled.
Cautions
If you run this service, the data of files that are currently being edited on the virtual server are not saved.
Service Definition Properties
The following table lists the properties shown in the Service Definition window.
Property name
(multiple names can be
specified)
Check network
connectivity
Description
Specifies one or more
names for the virtual
server. (This is the name
of the virtual server as it
is visible in Hyper-V.
This is not the host
name in the OS.) If
specifying multiple
names, separate them
with commas. You can
specify up to 99 names.
Specifies whether to
check network
connectivity after starting
a virtual server.
Stop virtual server: Service details
Required or optional
R
R
353