HPE XP7 Automation Director User Manual page 333

Property key
hyperv.scsiDiskLocation SCSI controller location
hyperv.osSettingWaitTim
e
common.icmpEchoTime
out
hyperv.checkVmStateEn
abledCount
hyperv.checkVmStateEn
abledInterval
hyperv.checkJobStateCo
untGetDriveList
hyperv.checkJobStateInt
ervalGetDriveList
Property name
Wait time before initial
OS setup finishes
Timeout period for ICMP
echo requests
Virtual server status
(startup complete) check
count
Virtual server status
(startup complete) check
interval
Job monitoring count
(Win32_LogicalDisk
method)
Job monitoring interval
(Win32_LogicalDisk
method)
Description
Specify the location of
the SCSI controller for
which a system disk has
been set. This property
takes effect only if the
generation number of
the exported virtual
server is 2.
Specify in seconds the
time to wait before initial
OS setup finishes.
To check network
connectivity, specify in
milliseconds the time to
wait for a reply to an
ICMP echo request
performed after the
virtual server starts.
Specifies the number of
times to check whether
virtual server startup is
complete. This value
combined with the check
interval for the virtual
server status (startup
complete) determines
the maximum wait time.
Specifies the interval in
seconds between
checks for whether
virtual server startup is
complete.
This property adjusts the
job monitoring count for
monitoring requests to
Hyper-V for processing
(Win32_LogicalDisk
method). You do not
need to change the
value of this property.
This property adjusts the
job monitoring interval
for monitoring requests
to Hyper-V for
processing
(Win32_LogicalDisk
method). You do not
need to change the
value of this property.
Additional service templates
Required
R
R
R
R
R
R
R
333