HPE XP7 Automation Director User Manual page 255

• An organization name and an owner name are required. If no organization name is specified,
"Organization" is assumed; if no owner name is specified, "Owner" is assumed.
• Entry and re-entry of an OS user password are required. If one of them is omitted or if the entered
passwords do not match, "Password123" is set as the password.
• WORKGROUP or DOMAIN must be selected from the OS.selectWorkgroupDomain selection list. If
neither WORKGROUP nor DOMAIN is selected, "WORKGROUP" is set as the workgroup. If no
workgroup name or domain name is entered, "WORKGROUP" is set as the workgroup.
• When WORKGROUP is selected from the OS.selectWorkgroupDomain selection list, a maximum of
15 bytes can be specified for the workgroup name. If the specified workgroup name exceeds 15 bytes,
"WORKGROUP" is assumed.
• When DOMAIN is selected from the OS.selectWorkgroupDomain selection list, a domain name,
domain user name, and domain password are required. If any one of them is omitted or a specified
value is invalid, "WORKGROUP" is set as the workgroup.
When the OS of the virtual server to create is Linux OS:
When the OS of the virtual server to be created is Linux OS, a domain name and DNS suffix are required.
If the specification is omitted, "localdomain" is assumed.
When the OS of the virtual server to create is a Windows-based OS or Linux OS:
• All four of IP address, subnet mask, default gateway, and DNS server must be specified. If any one of
them is omitted, none of them is set.
• If the OS information acquisition repeat count is omitted, "72" is assumed.
• If the OS information acquisition repeat interval is omitted, "5" is assumed.
• You must specify both the current port group name and the new port group name. If either is omitted,
the port group is not renamed. If there are multiple port groups with the same name, only one of them
is renamed.
• All three of destination IP address, subnet mask, and default gateway must be specified. If any one of
them is omitted, a static route is not set.
• A maximum of 60 characters can be specified in the virtual server name property (vmware.vmName).
Service Definition Properties
The following table lists the properties visible in the Service Definition window for the Deploy and Setup
OS on Virtual Machine service template.
Additional service templates 255