HPE XP7 Automation Director User Manual page 167

• When specifying email addresses in Notification Settings, configure SMTP settings in the
Administration Tab and verify that the SMTP server is accessible from the Automation Director server.
• If LIP reset is enabled, register all ESX server information with login credentials as Agentless Remote
Connections in the Administration Tab.
• Specify the python execution path in the shared properties of the Python Interpreter Path in the
Administration Tab.
NOTE: When you use https with Web Service Connections, you must first import certificates for Web
Service Connections and import certificates into the Java trust store. Detailed information is provided
in the HPE XP7 Automation Director Installation and Configuration Guide.
Default Ports
Port number
23450
23451
Edit Service settings
The following table lists the Edit Service settings for the Allocate Fabric Aware Volumes and Create
Datastore for ESX Cluster service template.
Navigation pane
Target ESX Cluster
Target Storage
Use
Communication from Automation Director to Configuration Manager
Secure communication from Automation Director to Configuration Manager
Settings pane
vCenter Connection
ESX Cluster
Perform LIP Reset
ESX Prompt Pattern
Configuration Manager
Connection
Storage System
Description
Specify a vCenter Server that is
registered as a Web Service
Connection in the Administration
Tab.
Specify the ESX Cluster name.
Perform LIP reset on the ESX
host.
If you enable LIP Reset, you
must also register agentless
remote connection settings for
each ESX Server.
Specifies the command prompt
pattern to use when running
esxcli on the ESX server. You
do not need to specify this if
"Perform LIP Reset" is disabled.
Select the Configuration Manager
server which is registered as a
Web Service Connection in the
Administration Tab.
Select a storage system.
Table Continued
Services catalog 167