HPE XP7 Automation Director User Manual page 141

Navigation pane
Resource Criteria
Host Settings
Navigation pane
Volume Settings
Settings pane
Resource Group
Number of Volumes
LDEV ID Starts From
Volume Capacity
Pool
Volume Label
LUN Starts from
Virtual LDEV ID Starts From
Storage Port Configuration
Port Type
Host Group Settings
Settings Pane
Configuration Manager
Connection
Storage System
Resource Group
Number of Volumes
LDEV ID Starts From
Description
Specify the Resource Group.
Specify the number of volumes to make
available for the service. If necessary, you
can specify a Single Value, Multiple
Values, or a Range.
Specify the starting LDEV ID as a
hexadecimal number for the volume to
allocate.
Specify the volume capacity in MBs, GBs,
or TBs.
Provides a table from which you can
choose the pool.
Specify the volume label.
Specify the starting logical unit number
assigned to the volume for a host.
Specify the starting Virtual LDEV ID as a
hexadecimal number for the volume to
allocate.
Specify the Storage Port Configuration
Expressions (Name and Value) that meets
the specified criteria (Equals, Not Equals,
Starts with, and Ends with) based on the
selected condition (All or Any).
Specify either fibre or iSCSI as the port
type.
Specify the parameters required to create a
new Host Group/iSCSI Target or specify to
use an existing Host Group/iSCSI Target.
Description
Provides a table from which you
can choose the Configuration
Manager connection.
Provides a table from which you
can choose the storage system.
Specify the Resource Group.
Specify the number of volumes to
make available for the service. If
necessary, you can specify a
Single Value, Multiple Values,
or a Range.
Specify the starting LDEV ID as a
hexadecimal number for the
volume to allocate.
Services catalog
Table Continued
141