HPE XP7 Automation Director User Manual page 352

Property key
hyperv.targetHost
hyperv.waitTime
common.icmpEchoTime
out
hyperv.checkVmStateEn
abledCount
hyperv.checkVmStateEn
abledInterval
Service Definition and Submit Service Properties
The following table lists the properties shown in the Service Definition window and the Submit Service
window.
352 Additional service templates
Property name
Hyper-V server host
name
Wait time before starting
to obtain IP address
Timeout period for ICMP
echo requests
Virtual server status
(startup complete) check
count
Virtual server status
(startup complete) check
interval
Description
Specifies the host name
or IP address of the
Hyper-V server. IPv6
addresses are not
supported.
When performing a
network connectivity
check, specifies the
amount of time, in
seconds, after the virtual
server starts to wait
before starting to obtain
the IP address.
Specify in milliseconds
how long the service
waits for a reply to an
ICMP echo request sent
to confirm startup of a
virtual server.
Specifies the number of
times to check whether
virtual server startup is
complete. This value
combined with the check
interval for the virtual
server status (startup
complete) determines
the maximum wait time.
Specifies the interval in
seconds between
checks for whether
virtual server startup is
complete.
Required or optional
R
R
R
R
R