HPE XP7 Automation Director User Manual page 325

• When only one NIC is installed on the virtual server, the IP address to be set for the NIC is
determined based on the following priority: IP address for management > second IP address > third
IP address > fourth IP address. Among the specified IP addresses, only the one with the highest
priority is set and the others are discarded.
• When two or more NICs are installed on the virtual server, the specified IP addresses are allocated
to the NICs in the following order: management-use IP address > second IP address > third IP
address > fourth IP address. Specification of blank IP addresses is skipped. For example, if the
management-use IP address, second IP address, and fourth IP address are specified (that is, the
third IP address is not specified), the fourth IP address is allocated to the third NIC on the virtual
server. If the number of specified IP addresses exceeds the number of NICs installed on the virtual
server, the IP addresses that are not allocated to NICs are discarded.
5. The virtual server's (second to fourth) connection-destination virtual switches are set:
• The connection-destination virtual switches that have already been set on the exported virtual
server are replaced with the specified ones.
• For the first NIC, set a management-use virtual switch that can communicate with the local server.
For the second to fourth NICs, set a management-use or operation-use virtual switch according to
the user operating requirements.
• If the number of specified virtual switches exceeds the number of NICs installed on the virtual
server, only the virtual switches allocated to NICs are enabled.
6. If the management-use IP address to be set in the OS of the virtual server is specified and two or
more IP addresses are set for the virtual server, a static route is set.
7. If DOMAIN is selected from the selection list for the OS.selectWorkgroupDomain property, and the
domain name, domain user name, and domain password are specified, processing to join the domain
starts.
Prerequisites
• Conditions related to the settings on the Hyper-V server:
◦ Virtual switch settings must be specified.
◦ Each virtual switch name must be unique within the Hyper-V server.
◦ An exported virtual server to deploy must be created.
• Conditions related to the exported virtual server to be deployed:
◦ The Data Exchange service of Hyper-V Integration Service is enabled.
◦ Before a virtual server is exported from the Hyper-V server, the virtual server must satisfy the
following conditions:
– The administrator user password is blank.
– The network settings are deleted.
◦ If the network adapter settings are specified on the virtual host, make sure that the values of the
following settings are blank, and then set Obtain an IP address automatically and Obtain DNS
server address automatically:
Additional service templates 325