HPE XP7 Automation Director User Manual page 253

Property Key
UserResponsePlugin.res
ponseTimeOut
vmware.checkPowerStat
eCount
vmware.checkPowerStat
eInterval
Service Definition and Submit Service Properties
The following table lists the properties visible in the Service Definition and Submit Service windows for
the Delete Virtual Machine service template.
Property Key
vmware.vmName
NOTE: Although some of the properties in the tables indicate that they can be omitted, they may be
required when used in conjunction with some other property setting as indicated in the descriptions.
Prerequisites
The following conditions must be met:
• VMware vSphere ESXi (or VMware ESX Server) is managed by VMware vCenter Server.
• Each virtual server name is unique among the vCenter servers.
• VMwareTools is installed on the target virtual server.
Server requirements
To use this service template, the following servers are required:
Property Name
Response timeout time
(minutes)
Power status check
count
Power status check
interval
Property Name
Virtual server name
Description
Specify how long (in
minutes) the service
waits for a user
response before timing
out. In the event of a
response timeout, the
service will terminate
abnormally.
Specifies the number of
times to check the power
status when confirming
that the virtual server is
stopped. In combination
with the power status
checking interval, this
determines the
maximum wait time.
Specifies the interval in
seconds for checking the
power status when
confirming that the
virtual server is stopped.
Description
Specify the name of the
virtual server. This name
is used to represent the
virtual server in VMware
vCenter server. It is not
used as a host name by
the OS.
Additional service templates
Required or optional
R
R
R
Required or optional
R
253