HPE XP7 Automation Director User Manual page 262

Property Key
OS.ipAddress4
OS.timeZoneWin
OS.timeZoneLin
NOTE: Although some of the properties in the tables indicate that they can be omitted, they may be
required when used in conjunction with some other property setting as indicated in the descriptions.
Prerequisites
The following conditions must be met:
• Conditions for the settings on VMware vSphere ESXi (or VMware ESX Server)
◦ A data store is registered.
◦ A port group is set up. For a port group that is set up for the virtual server, specify a port group on
the network using a standard virtual switch (vNetwork or vSphere standard switch.)
◦ The template used for deployment is already created.
◦ If the virtual server is stored in a resource pool, and the resource pool, cluster, and vApp names
are unique. The same name cannot be assigned to more than one resource pool, cluster, and vApp
although their types are different, such as a duplication of a cluster name and a vApp name or a
duplication of a cluster name and a resource pool name.
◦ Data store name.
◦ Resource pool name.
◦ vApp name.
• Conditions for the template used for deployment:
◦ VMware Tools are installed.
◦ The running of remote commands is allowed by the settings (administrative share for Windows-
based OS and SSH for Linux OS is enabled.)
262 Additional service templates
Property Name
IP address (for fourth
NIC)
Time zone: Windows-
based OS setting
Time zone: Linux OS
setting
Description
Specifies the IP address
that is set for the fourth
NIC recognized by the
OS on the virtual server.
IPv6 addresses are not
supported.
Specifies the time zone
that the OS on the virtual
server is set to (for
Windows-based OS
only). If nothing is
entered, the time zone
"International Date Line
West" is used.
Specifies the time zone
that the OS on the virtual
server is set to (for Linux
OS only). If nothing is
entered, the time zone in
the template is used.
Required or optional
O
O
O