Service Template name
Allocate Fabric Aware Volumes
and Create Datastore for ESX
Cluster
124
Services catalog
Software prerequisites
•
Configuration Manager REST
API v8.5.3 or later.
•
Brocade Network Advisor (BNA)
14.2 (SAN System Administrator
or Zone Administrator role is
required)
•
VMware vSphere Hypervisor
(ESXi) v6.5, v6.5 U1/U2
•
VMware vCenter v6.5, v6.5
U1/U2
•
Python 3.5
The following libraries are
required:
◦
pyvmomi 6.5.0.2017.5.post1
◦
six 1.11.0
◦
urlib3 1.22
◦
certifi 2017.1.5
◦
idna 2.6
◦
chardet 3.0.4
◦
requests 2.18.4
Setup prerequisites
•
Create a datastore cluster.
•
Connect the storage
system and hosts to the
SAN and verify that they
belong to the correct fabric.
•
Create a storage pool.
•
Disable storage DRS
before using this service
template. Adding a
Datastore into a Datastore
cluster can fail when
Storage DRS is enabled.
•
When specifying email
addresses in Notification
Settings, configure the
SMTP settings in the
Administration Tab and
verify that the SMTP server
is accessible from the
Automation Director server.
•
If LIP reset is enabled,
register all ESX server
information with login
credentials as Agentless
Remote Connections in the
Administration Tab.
•
Create an ESX cluster.
•
Add hosts to the ESX
cluster.
•
Configure a single Brocade
Network Advisor to manage
the fabric.
•
Verify that all storage ports
and HBA ports, which are
used by this service
template, belong to the
fabric.
•
When allocating volumes in
VSM, add all required
resources such as LDEV ID
and host group ID to the
VSM resource group.
Table Continued