Configuring Web Service Connections - HPE XP7 Automation Director User Manual

3. To use a proxy server, select the check box and enter the following information:
• IP Address/Host Name
• Port
• Authentication
• Authentication Type
• User ID
• Password
4. Enter assigned infrastructure groups.
5. Click OK.
What to do next
If you are using Data Mobility services, you must first ensure that all Virtual Storage Machines (VSMs)
across sites use the same resource group name so that the services can recognize them. When creating
a resource group name, you must adhere to the following rules:
Storage System Model(Virtual Serial Number),Storage System Model@Virtual Serial Number
For example, if the resource group consists of XP7 storage systems with a virtual serial number of 20000,
you would create a resource group with the following name:
XP7(20000), XP7@20000
Then you must update the Virtual Storage Machine Names shared property setting for recognizing VSMs
when using Data Mobility services. For detailed information, see Modifying shared service properties
for data mobility services.
More information
Modifying the shared service properties on page 78
Built-in shared properties on page 77
Modifying shared service properties for Data Mobility services on page 78

Configuring Web Service connections

You can add or edit a web service connection by using the following procedure:
Procedure
1. From the Administration tab, click Connection Settings > Web Service Connections.
2. Click Add or Edit and enter the following information:
• Category
• Name
• IP Address/Host Name
• Protocol
• Port
70 Configuring Web Service connections