HPE XP7 Automation Director User Manual page 132

Navigation pane
Volume Settings
Resource Criteria
Host Settings
Fabric Settings
132 Services catalog
Settings pane
Configuration Manager
Connection
Storage System
Resource Group
Number of Volumes
LDEV ID Starts from
Volume Capacity
Pool
Volume Label
LUN Starts from
Virtual LDEV ID Starts from
Storage Port Configuration
Port Type
Host Group Settings
Use Fabric Settings
Description
Provides a table from which you can
choose the Configuration Manager
connection.
Provides a table from which you can
choose the storage system.
Specify a resource group.
Specify the number of volumes to make
available for the service. If necessary,
you can specify a Single Value,
Multiple Values, or a Range.
Specify the starting LDEV ID as a
hexadecimal number for the volume to
allocate.
Specify the size of the allocated
volumes.
Specify the pool.
Specify a volume label.
Specify the number of volumes to
allocate.
Specify the starting virtual LDEV ID for
the volume to allocate to the host.
Specify the Storage Port Configuration
Expressions (Name and Value) that
meets the specified criteria (Equals, Not
Equals, Starts with, and Ends with)
based on the selected condition (All or
Any).
Specify fibre as the port type.
Specify the parameters required to
create a new Host Group or specify to
use an existing Host Group.
Determines whether to use fabric
information from the FC switch manager
services for path selection.
Table Continued