HPE XP7 Automation Director User Manual page 149

Navigation pane
Volume Settings
Host Settings:
Settings pane
Configuration Manager
Connection:
Storage System:
Virtual Storage Machine:
Number of Volumes:
LDEV ID Starts From:
Volume Capacity:
Pool:
Volume Label:
LUN Starts from:
Target Host Group/iSCSI Target:
Existing Host Groups Or iSCSI
Targets:
Port Type:
Description
Provides a table from which you
can choose the Configuration
Manager connection.
Provides a table from which you
can choose the storage system.
Specifies the Virtual Storage
Machine (VSM) from a pull-down
list.
Specifies the number of volumes
to be made available for the
service. If necessary, you can
specify a Single Value, Multiple
Values, or a Range.
Specifies the starting LDEV ID in
hexadecimal format.
Specifies the volume capacity in
MBs, GBs, or TBs.
Provides a table from which you
can choose the pool.
Specifies the volume label.
Specifies the starting value for
the LUN.
Specifies the option of using an
existing, or creating a new Target
Host Group/iSCSI Target. You
can choose an existing target
from the provided table or, when
creating a new target, you can
specify the Host Group Settings
depending on the port type you
select.
Provides a table from which you
can choose an existing Host
Group/iSCSI Target. Your
selections are shown below the
table.
Specifies either fibre or iSCSI as
the port type.
Table Continued
Services catalog 149