HPE XP7 Automation Director User Manual page 159

Navigation pane
Host Settings:
Copy Group Settings
Settings pane
Target Host Group/iSCSI Target:
Existing Host Groups Or iSCSI
Targets:
Port Type:
Host Group Settings:
Target Copy Group:
Copy Group:
Copy Group Name:
Description
Specifies the option of using an
existing, or creating a new Target
Host Group/iSCSI Target. You
can choose an existing target
from the provided table or, when
creating a new target, you can
specify the Host Group Settings
depending on the port type you
select.
Provides a table from which you
can choose an existing Host
Group/iSCSI Target. Your
selections are shown below the
table.
Specifies either fibre or iSCSI as
the port type.
Specifies the parameters needed
to create a new Host Group/
iSCSI target.
Port: -- Specifies the port of the
host group target.
WWN Settings: -- Specifies the
WWN settings when using the
fibre port setting.
Host Group Name: -- Specifies
the host group name when using
the fibre port type.
iSCSI Settings: -- Specifies the
iSCSI settings when using the
iSCSI port type.
iSCSI Target Name: -- Specifies
the iSCSI target name when
using the iSCSI port type.
Host Mode: -- Specifies the host
mode.
Host Mode Options: -- Specifies
the host mode options.
Specifies the option of using an
existing, or creating a new Copy
Group.
Provides a table from which you
can choose an existing Copy
Group.
Specifies the name when
creating a new Copy Group.
Table Continued
Services catalog 159