Execute Remote Command: Service Details - HPE XP7 Automation Director User Manual

Execute Remote Command: Service details

Service Definition Properties
The following table lists the properties shown in the Service Definition and Submit Service windows for
the Execute Remote Command service template.
Property Key
common.targetHost
common.remoteComma
nd
common.remoteComma
ndParameter
NOTE: Although some of the properties in the tables indicate that they can be omitted, they may be
required when used in conjunction with some other property setting as indicated in the descriptions.
Usage guidelines
• If the standard output result of the command exceeds 100 KB, the service ends abnormally.
• Up to 1,024 characters of the standard output result of the command are stored in property
common.stdoutProperty; any output more than this is discarded.
• Interactive commands and scripts that require user input and commands that do not end automatically
using a UI display or similar input cannot be run.
• If the OS running on the target server is UNIX, the command is run in the default locale defined in the
agentless-connection target for the connected user.
• When using non-ASCII characters for the common.remoteCommand property and
common.remoteCommandParameter property in non-Linux OS Unix OS servers, the requirements
described for running command lines containing non-ASCII characters in Unix OS must be satisfied.
280 Execute Remote Command: Service details
Property Name
Host name of target
server
Command
Command parameters
Description
Specifies the host name
or IP address of the
target server. IPv6
addresses are not
supported.
Specify the full path of
the command to run on
the target server. If the
path contains a space,
enclose the entire path
in double quotation
marks.
Specify the parameters
for the command to run
on the target server. If a
parameter contains a
space, enclose the
entire parameter in
double quotation marks.
Required or optional
R
R
O