HPE XP7 Automation Director User Manual page 293

Property Key
OS.dnsSuffix
openstack.floatingIpOpti
on
openstack.networkName
Ext
openstack.floatingIpAddr
ess
NOTE: Although some of the properties in the tables indicate that they can be omitted, they may be
required when used in conjunction with some other property setting as indicated in the descriptions.
Prerequisites
The following conditions must be met:
• Conditions for using the prerequisite products in the target system:
◦ In the subnet settings of the network to which the instance is connected, DHCP must be enabled
so that an IP address can be assigned dynamically.
◦ The server image used to start the instance must already be created.
◦ The instance type used to start the instance must already be created.
◦ The network used to start the instance must already be created.
• Conditions related to the server image used to start the instance:
◦ Agentless connection must be possible.
◦ The firewall must permit ICMP (ECHO) replies.
• Conditions related to instances:
◦ The names of instances within the same project must be unique.
• Conditions related to Automation Director:
Property Name
DNS suffix name
Whether to allocate a
floating IP address
Network name (for
external connection)
Floating IP address
Description
Specify the DNS suffix
name.
Specify whether to
allocate a floating IP
address to the instance.
If you want to allocate a
floating IP address to the
instance, select "yes". If
you do not want to
allocate a floating IP
address to the instance,
select "no".
Specify the name of the
external network from
which the floating IP
address is to be
obtained.
Specify the floating IP
address to be allocated
to the instance. Make
sure that you do not
specify an IPv6 address.
Additional service templates
Required
O
R
O
O
293