HPE XP7 Automation Director User Manual page 245

Property Key
vmware.capacity
vmware.vHardDiskType
vmware.deviceName
NOTE: Although some of the properties in the tables indicate that they can be omitted, they may be
required when used in conjunction with some other property setting as indicated in the descriptions.
Prerequisites
The following conditions must be met:
• The virtual servers to be added to the virtual disk are off.
• VMware vSphere ESXi (or VMware ESX Server) is managed by VMware vCenter Server.
• Each virtual server name is unique among the vCenter servers.
• VMwareTools is installed on the target virtual server.
Property Name
Volume size (GB)
Virtual disk type
LUN device name
Description
Specify the volume size
in GB. This property is
mandatory when "Flat" is
specified as the virtual
disk type. This property
is ignored when the
virtual disk type is
"RawVirtual" or
"RawPhysical".
Specify the type of the
virtual disk as follows:
Flat : the virtual disk is
created on a VMFS.
RawPhysical : the virtual
disk is configured using
physical raw device
mapping.
RawVirtual : the virtual
disk is configured using
virtual raw device
mapping.
Specify the type of the
virtual disk as follows:
Flat : the virtual disk is
created on a VMFS.
RawPhysical : the virtual
disk is configured using
physical raw device
mapping.
RawVirtual : the virtual
disk is configured using
virtual raw device
mapping.
Additional service templates
Required or optional
O
O
O
245