HPE XP7 Automation Director User Manual page 144

Software prerequisites
The following software is required to use the Allocate Like Volumes with Configuration Manager service
template:
Configuration Manager REST API v8.6.2-00 or later
Setup prerequisites
Complete the following setup prerequisites if you have not already done so:
• Create a Web service connection for the XP7 Configuration Manager REST API.
• Use the same authentication information for each storage system managed by XP7 Configuration
Manager REST API for which the Web service connection was created. Also, in addition to having the
same authentication information connected to all the storage systems, ensure that these credentials
are assigned the following roles:
◦ Security administrator (View, Edit)
◦ Storage administrator (Provisioning)
Default ports
Port number
22015
22016
23450
23451
Edit Service settings
The following table lists the Edit Service settings for the Allocate Like Volumes with Configuration
Manager service template.
Navigation pane
Storage System
Volume
144 Services catalog
Use
Communication from Automation Director client to Automation Director server.
Secure communication from Automation Director client to Automation Director
server.
Communication from Automation Director to XP7 Configuration Manager.
Secure communication from Automation Director to XP7 Configuration
Manager.
Settings pane
Connection
Storage System
Source Volume Filter
Description
Select the XP7 Configuration
Manager REST Web Service
Connection.
Information such as IP address
and credentials is registered in
Automation Director to
communicate with XP7
Configuration Manager.
Select the storage system.
Specify the source volume filter.
Table Continued