HPE XP7 Automation Director User Manual page 126

Service Template name
Add Host to Cluster in vCenter
126 Services catalog
Software prerequisites
• Configuration Manager REST
API v8.5.3 or later.
• Brocade Network Advisor (BNA)
14.2 (SAN System Administrator
or Zone Administrator role is
required)
• VMware vSphere Hypervisor
(ESXi) v6.5, v6.5 U1/U2
• VMware vCenter v6.5, v6.5
U1/U2
• Python 3.5
The following libraries are
required:
◦ pyvmomi 6.5.0.2017.5.post1
◦ six 1.11.0
◦ urlib3 1.22
◦ certifi 2017.1.5
◦ idna 2.6
◦ chardet 3.0.4
◦ requests 2.18.4
Setup prerequisites
• Create an ESX cluster.
• Add hosts to the ESX
cluster.
• Configure a single Brocade
Network Advisor to manage
the fabric.
• Verify that all storage ports
and HBA ports, which are
used by this service
template, belong to the
fabric.
• When allocating volumes in
the VSM, add all required
resources such as LDEV ID
and host group ID to the
VSM resource group.
• Register Configuration
Manager REST API in
Automation Director.
• Register VMware vCenter
Server in Automation
Director.
• Register Brocade Network
Advisor in Automation
Director.
• Register all storage
systems in Configuration
Manager REST API.
• Verify that the ESXi host
boot image is stored on the
host's local disk.
• Properly connect the
storage system and hosts
in SAN and verify that they
belong to the correct fabric.
Table Continued