HPE XP7 Automation Director User Manual page 133

Navigation pane Settings pane
Connection Names
Resource Groups
Target Fabrics
Use Existing Zone
Number of Hops Restriction
Description
Specifies which FC switch manager
services are used to select a path.
The settings of each FC switch manager
services must be assigned an
Infrastructure Group from the
Administration tab.
Note: Use a comma when specifying
multiple BNAs or DCNMs.
If omitted, all FC switch managements
services assigned Infrastructure Group
are selected. If "Use Fabric Settings" is
false, this field is ignored.
BNA and DCNM cannot be used
together.
Specifies the Resource Group of the
BNA. If "Use Fabric Settings" is false,
this field is ignored. For DCNM, this field
is ignored.
Specifies the fabric to use where
multiple values are delimited by
commas. If omitted, all of the fabrics that
FC switch manager services monitors
are used.
For DCNM, you can specify a VSAN in
this field. In this case, separate the
fabric name and the VSAN name with a
colon.
If only the fabric name is specified, all
the VSANs to which the fabric belongs
are targeted.
If "Use Fabric Settings" is false, this field
is ignored even if entered.
Specifies to allocate either within an
existing zone or to any connectable
path. If True is specified, selects a path
within the range of existing Zone setting.
If False is specified, selects a
connectable path regardless of the
existing Zone setting.
Determines whether to restrict path
selection to within a designated number
of hops. If True is specified, selects a
path within a specific number of hops. If
False is specified, selects a connectable
path regardless of the number of hops.
Services catalog
Table Continued
133