Service Information - KYMCO DINK 200i Service Manual

3
. INSPECTION/ADJUSTMENT

SERVICE INFORMATION

GENERAL
WARNING
xBefore running the engine, make sure that the working area is well-ventilated.
Never run the engine in a closed area. The exhaust contains poisonous carbon
monoxide gas which may cause death to people.
xGasoline is extremely flammable and is explosive under some conditions. The
working area must be well-ventilated and do not smoke or allow flames or sparks
near the working area or fuel storage area.
SPECIFICATIONS
Throttle grip free play : 2 6 mm (0.08 0.24 in)
Spark plug
Spark plug gap
Valve clearance
Idle speed
Cylinder compression : DINK 125: 15 kgf/cm²(1500 kPa, 213 psi)
Engine oil capacity:
At disassembly : 1.1 L (0.968 lmp qt, 1.166 US qt)
At change
Gear oil capacity :
At disassembly : 0.2 L (0.176 lmp qt, 0.212 US qt)
At change
Coolant capacity :
Reserve tank capacity: 0.37 liter (0.4 US qt, 0.33 lmp qt)
Radiator capacity : 1 liter (1.1 US qt, 0.88 lmp qt)
Ignition timing
TIRE
Front 1.75 kgf/cm² (175 kPa, 24.85 psi) 1.75 kgf/cm² (175 kPa, 24.85 psi)
Rear 2 kgf/cm² (200 kPa, 28.4 psi)
TIRE SPECIFICATION:
Front : 120/70-13
Rear: 140/70-12
3-1
: DINK 125: NGK: DPR7EA9
: DINK 200i: NGK: DPR6EA9
: 0.9 mm (0.036 in)
: IN: 0.1 mm (0.004 in)
: DINK 125: 1700 rpm
: DINK 200i: 1660 rpm
: DINK 200i: 16 kgf/cm²(1600 kPa, 227.2 psi)
: 0.9 L (0.792 lmp qt, 0.954 US qt)
: 0.18 L (0.16 lmp qt, 0.19 US qt)
: DINK 125: 10qr1.5q/1000 rpm
: DINK 200i: ECU control
1 Rider (60 kg)
EX: 0.1 mm (0.004 in)
2 Riders (110 kg)
2.25 kgf/cm² (225 kPa, 31.95 psi)
DINK 200i125