Cable & Harness Routing - KYMCO DINK 200i Service Manual

1. GENERAL INFORMATION
CABLE & HARNESS ROUTING
(1) Brake light switch (Front brake)
(4) Left handlebar switch
(6) Rear brake hose
(A) Pass the front brake hose, rear brake hose, throttle cable, right handlebar switch and left handlebar
switch through the guide.
Note: Pass the throttle cable through the lower handlebar cover.
1-15
(2) Front brake hose
(5) Brake light switch (Rear brake)
(7) Right handlebar switch
DINK200i/125
(3) Throttle cable (Note)