KYMCO DINK 200i Service Manual page 257

14. DINK 200i:
Failure
Blinks
Codes
15 P0700 CVT threshold exceeded fault
16 P0115 Engine temperature sensor fault
17 P1561 Temperature gauge fault
18 P0650 Check engine lamp fault
19 P1410 CO potentiometer fault
14-15
FUEL SYSTEM (Auto Control Fuel Injection System)
Fault description Priority Fault management
1.When the engine start turns soon
over the 3250 rpms, in order to
avoid hurtling suddenly and
violently, the ECU will reduce
engine to turn to even turn off
soon.
2.Ask user to avoid launching the
2
engine moment nasty open
accelerator.
3.Does checking the accelerator
line(Cable) block?
4.Is the Dai whether the screw
position enactment is normal or
not soon?(0.68 ±s 0.05)
5. Does the CVT leather belt split?
1.Confirming the sensor know the
machine electric resistance
whether in the specification?
2.Does confirming the sensor know
2
the machine deals with contact,
connects line and hasn't moved
and break road?(the ECU pin 9).
2 Does not have the information.
1.Does checking the engine
examination light light bulb
destroy by fire?
2.Checking the engine examination
light light bulb specification is a
3
1.7 Ws, 12 VDCs?
3.Does checking the engine
examination light circuit break
road?(the ECU pin 4)
2 Does not have the information
(Cont'd)