Cylinder Head Cover - KYMCO DINK 200i Service Manual

6
. CYLINDER HEAD/VALVES

CYLINDER HEAD COVER

REMOVAL
Remove the two nuts (1) and four bolts (2),
then remove the cylinder head cover.
INSTALLATION
Install a new cylinder head cover O-ring and
install the cylinder head cover.
Be sure to install the O-ring into the
groove properly.
Install and tighten the cylinder head cover
bolts and nuts to the specified torque in a
crisscross pattern.
Torque: 1.2 kgf-m (12 N-m, 8.6 lbf-ft)
DINK 200i/125
O-ring
6-4