Rear Brake Fluid - KYMCO DINK 200i Service Manual

16
. REAR BRAKE/REAR FORK/REAR
WHEEL/REAR SHOCK ABSORBER

REAR BRAKE FLUID

Check
Brake fluid:
Brake hose:
Cracks/wear/damage
Apply the brake lever several times.
Fluid leakage Replace.
Brake hose clamp:
Loosen Tighten
FLUID REPLACEMENT/AIR
BLEEDING
A contaminated brake disc or pad
reduces stopping power. Discard
contaminated pads and clean a
contaminated disc with a high quality
brake degreasing agent.
Do not allow foreign material to enter
the system when filling the reservoir.
Avoid spilling brake fluid on painted,
plastic or rubber parts. Place a rag over
these parts whenever the system is
serviced.
Once the hydraulic system has been opened,
or if the brake feels spongy, the system must
bled. When using a commercially available
brake bleeder, follow the manufacturer's
operating instructions.
Replace.
DINK 200i/125
16-4