KYMCO DINK 200i Service Manual page 31

1. GENERAL INFORMATION
• •
Refer to the page 1-30 to understand the
fuel system of DINK 200i.
(1) Coolant temperature sensor wire
(3) Throttle cable
(6) Thermostat
(8) DINK 125: Fuel hose (between fuel filter and fuel tank)
(10) DINK 125: Fuel hose (between fuel filter and fuel pump)
(11) DINK 125: Fuel pump vacuum hose
(12) DINK 125: Fuel pump
(14) DINK 125: Fuel hose (between fuel pump and carburetor)
(A) Pass the auto choke wire (DINK 125), throttle cable and harness wire through the guide.
(B) Pass the fuse hose and vacuum hose (DINK 125) through the plastic band.
(4) Ignition coil
(7) Bleed hose
(13) Upper radiator hose
DINK 200i/125
(2) Ground cable
(5) Crankcase breather hose
(9) DINK 125: Fuel filter
1-28