KYMCO DINK 200i Service Manual page 205

12
. COOLING SYSTEM
DINK 200i/125
Bolts
WATER PUMP SHAFT REMOVAL
Disconnect the water hose from the right
crankcase cover.
Remove the 3 bolts attaching the water
pump assembly.
Remove the water pump assembly, gasket
and dowel pins.
Water Pump Assembly
Water Pump Assembly
Inner Bearing
Remove the water pump bearing snap ring
from the water pump assembly.
Remove the water pump shaft and shaft
inner bearing.
Snap Ring
Water Pump Shaft
Water Pump Shaft
Remove the water pump shaft outer
bearing.
Inner Bearing
12-14