KYMCO DINK 200i Service Manual page 41

1. GENERAL INFORMATION
NO SPARK AT SPARK PLUG
Inspection/Adjustment
Connect the diagnostic
tool, then check DTC
and correct problems.
Replace with a new
spark plug and inspect
again.
Check spark plug cap
and high-tension wire
for looseness
Check ignition unit
coupler for looseness
Measure resistance
between terminals of
ignition unit coupler
Check ignition coil
Symptom
Weak or no spark
Not loose
Good
Normal
Abnormal
Faulty spark plug
Good spark
Loose
Faulty spark plug
Poorly connected connector
Good
Abnormal
Faulty ignition coil
DINK 200i/125
Probable Cause
1-38