KYMCO DINK 200i Service Manual page 276

14. DINK 200 i:
Resistance
Measure the resistance between the air
pressure signal (V/R) and manifold
temperature sensor (Br/B) terminals.
Standard:
14260 16022 : (-20°C)
2353 2544 : (20°C)
568.9 597.4 : (60°C)
(Using diagnostic tool)
Enter RECIVE SIGNAL MENU (refer to the
"RECIVE SIGNAL MENU (USING
DIAGNOSTIC TOOL)" section in this
chapter).
Read page 01
Air Temp. (°C
Air Temp. sensor volt (V)
Atm. Press. (kPa)
Read page 05
MAPSample (kPa)
Be sure that the battery is in good
condition before performing this
measurement.
FUEL SYSTEM (Auto Control Fuel Injection System)
14-34