KYMCO DINK 200i Service Manual page 396

Table of Contents

Advertisement

20. LIGHTS/METERS/SWITCHES
SIDE STAND SWITCH
INSPECTION
Remove the luggage box (refer to the
"FRAME COVERS
REMOVAL/INSTALLATION" section in
the chapter 2).
Side stand switch (1) is located on side stand
Disconnect the side stand switch connector
(2).
There should be continuity between the
Yellow/Green and Green with the side stand
retracted.
There should be continuity between the
Yellow/Black and Green with the side stand
applied.
REMOVAL
Disconnect the side stand switch connector.
Remove the bolt (1) and side stand switch
from the side stand.
INSTALLATION
Installs the side stand switch aligning the
groove on the switch with the pin on the side
stand stay.
Install and tighten the side stand switch bolt
securely.
Connect the side stand switch connector.
20-13
DINK 200i/125

Hide quick links:

Advertisement

Table of Contents
loading

This manual is also suitable for:

Dink 125

Table of Contents