3
. INSPECTION/ADJUSTMENT
SPARK PLUG
Remove the spark plug cap and spark plug
(1).
Check the spark plug for wear and fouling
deposits.
Clean any fouling deposits with a spark plug
cleaner or a wire brush.
Specified Spark Plug:
DINK 125: NGK: DP7EA9
DINK 200i: NGK: DPR6EA9
Measure the spark plug gap.
Spark Plug Gap: 0.9 mm (0.036 in)
When installing, first screw in the spark
plug by hand and then tighten it with a
spark plug wrench.
Torque: 0.9 kgf-m (9 N-m, 6.5 lbf-ft)
3-15
Gap
Wear
0.9mm (0.036 in)
Fouling
Deposits
DINK 200i125
Cracks
Damage
Deformation