KYMCO DINK 200i Service Manual page 397

20. LIGHTS/METERS/SWITCHES
DINK 200i/125
HORN
INSPECTION
Remove the front cover (refer to the
"FRAME COVERS
REMOVAL/INSTALLATION" section in
the chapter 2)
Disconnect the horn connectors (1) from the
horn.
Connect a 12 V battery to the horn terminals.
The horn is normal if it sounds when the 12 V
battery is connected across the horn
terminals.
REMOVAL/INSTALLATION
Disconnect the horn connectors from the
horn.
Remove the nut (2) and horn.
Installation is in the reverse order of removal.
20-14