KYMCO DINK 200i Service Manual page 375

18
. IGNITION SYSTEM
CDI (DINK 125)
REMOVAL/INSTALLATION
Remove the luggage box (refer to the
"FRAME COVERS
REMOVAL/INSTALLATION" section in
the chapter 2).
Disconnect the CDI connectors (1) and
remove the CDI (2).
RESISTANCE INSPECTION
Measure the resistance between the terminals.
Due to the semiconductor in circuit, it
is necessary to use a specified tester for
accurate testing. Use of an improper
tester in an improper range may give
false readings.
DINK 200i/125
18-8