KYMCO DINK 200i Service Manual page 70

2
. EXHAUST MUFFLER/FRAME COVERS
DINK 200i/125
INNER COVER
Remove the front cover (see page 2-8).
Remove the front lower cover (see page 2-
10).
Remove the floorboard (see page 2-11).
Turn the fuel fill cap garnish
counterclockwise and remove it.
Turn the ignition key garnish
counterclockwise and remove it.
Remove the bolt.
Cap Garnish Key Garnish
Remove three screws and disconnect the fuel
fill duct.
Remove the two screws, then remove the
inner cover.
Installation is in the reverse order of removal.
2-14