KYMCO DINK 200i Service Manual page 155

8
. DRIVE AND DRIVEN PULLEYS/
KICK STARTER
Install the drive pulley face and ratchet.
Use the special tool to hold drive pulley face,
then tighten the nut to the specified torque.
Torque:
DINK 200i: 5.8 kgf-m (58 N-m, 42 lbf-ft)
DINK 125: 5.5 kgf-m (55 N-m, 40 lbf-ft)
Special tool:
Universal holder
8-11
A120E00017
Nut/Ratchet
Drive Pulley Face
DINK 200i/125
Universal Holder