KYMCO DINK 200i Service Manual page 141

7
. CYLINDER/PISTON
Inspect the exhaust side and intake side chain
guides.
Wear/Damage Replace.
INSTALLATION
Piston ring
Carefully install the piston rings into the
piston ring grooves with the markings facing
up.
Be careful not to damage the piston and
rings.
ΠDo not confuse the top and second rings.
ΠTo install the oil ring, install the oil ring,
then install the side rails.
Stagger the piston ring end gaps 120° degrees
apart from each other.
Stagger the side rail end gaps as shown.
Exhaust Side Guide
DINK 200i/125
Intake Side Guide
7-8