KYMCO DINK 200i Service Manual page 126

6
. CYLINDER HEAD/VALVES
DINK 200i/125
Punch Marks
INSTALLATION
Turn the A.C. generator flywheel so that the
"T" mark on the flywheel aligns with the
index mark on the crankcase.
Keep the round hole on the camshaft gear
facing up and align the punch marks on the
camshaft gear with the cylinder head surface
(Position the intake and exhaust cam lobes
down.) and install the cam chain over the
camshaft gear.
Round Hole Cam Chain
Install the dowel pins.
Dowel Pins
Camshaft Holder
Install the camshaft holder (refer to the
"CAMSHAFT HOLDER" section in this
chapter).
6-10