Diagnostic Tool (Pda) - KYMCO DINK 200i Service Manual

14. DINK 200i:
SELF-DIAGNOSTIC
PROCEDURES USING

DIAGNOSTIC TOOL (PDA)

You have to use a PDA and download
diagnostics program (KYDTool-5.0.E or
latest version of diagnostics program) into the
SD card at KYMCO web site.
We recommended the diagnostics
program be installed in the SD card.
Because the diagnostics program will
lose when the PDA no power if the
diagnostics program be installed in PDA.
The diagnostic cable can be purchased from
KYMCO.
SELF-DIAGNOSTIC PROCEDURES
(LOAD DTC)
1. Connect PDA, PDA cable and diagnostic
cable.
2. Put the side stand up and engine stop
switch is at "RUN".
3. Turn the ignition switch to "ON".
4. Connect the diagnostic cable and diagnostic
tool connector (1) in the battery compartment.
14-17
FUEL SYSTEM (Auto Control Fuel Injection System)
Diagnostic Cable
PDA PDA Cable
PDA
PDA Cable
Diagnostic Cable